Gait Training Patient Setup Screen Parameters - biodex 950-401 Application/Operation Manual

Gait Training Patient Setup Screen Parameters

NOTE: The three parameters for Gender, Height, and Age are mandatory fields and must be
completed before gait training can begin.
First and Last Name: Optional, touch the pop-up <Keypads> to enter the first and last
●
name. Touch <OK> to continue.
ID#: Optional or required depending on Configuration settings. Touch the pop-up
●
<Keypads> to enter an identification number. Touch <OK> to continue.
Gender: Touch the appropriate icon to choose <Male> or <Female>.
●
Height: This setting is used to determine step length. Touch the appropriate <Height>
●
icon to select the desired range. This value can also be a manual number entry (see
Figure 2.3). The manual height entry option can be set within the Configuration option
in system Utilities.
Weight: For new patients, a weight can be entered here in pounds. Entering weight data
●
is optional.
NOTE: If a patient has been selected using the Select a Patient function, the application will
display the existing height and weight as was previously recorded. If height or weight has
changed, the numbers can be adjusted and new test results will feature the updated
information. Once a test is performed, there is no way to edit the height or weight recorded for
that test result. Patient height and weight can also be changed at any time from the Patient
Management screen in system Utilities. The new numbers will be used for any subsequent tests.
Age / Date of Birth: Range is from 10 to 120 years old. Touch the <Age> keypad and
●
use the pop-up keypad to change the value. This value can also be derived from a Date
of Birth entry (see Figure 2.3). The Age/DOB option can be set within the Configuration
option in system Utilities. Touch <OK> to continue.
Gait Training Time: Default value is 6:00 minutes. Use the <▲> and <▼> icons to
●
change the value.
Additional Info (Figure 2.4): Touch <Additional Info> to enter information regarding the
●
patient's health status and the facility where treatment is taking place. In addition to
the predefined categories, the bottom four drop-down menus can be customized to
define new categories and associated selection lists. Entering Additional Information
data is optional.
Biofeedback Options (Figure 2.6): Touch <Biofeedback> to adjust biofeedback options
●
on the audio/visual Biofeedback Options screen.
Select Patient (Figure 2.7): Touch <Select Patient> to designate an existing patient
●
within the device's records for a new training session.
20
Biodex Medical Systems, Inc. © 2017