Connecting Components; Accessing Additional Ports And Connections - biodex 950-401 Application/Operation Manual

Connecting Components

In addition to the printer that is shipped with the Gait Trainer, other printers may be used with
the device. Most Windows 7 printers are compatible with the Gait Trainer display, but the
drivers for many of those printers may need to be installed. For help with this, please call
Biodex Customer Support at 631-924-9000, Option 3. Similarly, any Windows 7 keyboard or
mouse will automatically connect using one of the USB connections.
It is possible to connect the device to a printer wirelessly. Please call Customer Support for
instructions.
An external monitor can also be connected via the VGA port on the bottom of the display. Once
the external monitor's cable is connected, the <Mirror to External Monitor> button in System
Utilities must be selected. (This button is accessed by the following navigation steps from the
Home screen: Utilities > Configuration > System Configuration > Screen Configuration.)

Accessing Additional Ports and Connections

The Gait Trainer provides the user with the ability to access additional ports and connections
from the back, bottom side of the monitor. These connections can be used to attach an
additional printer, external monitor, or other component. In the example below, the monitor
has been removed from the device column for demonstration purposes.
To access these ports and connections, the back of the monitor can be temporarily removed as
detailed in Figure 1.9.
Figure 1.9. Accessing Additional Ports and Connections
GAIT TRAINER 3 (v3.X SOFTWARE) 17