Manual Treadmill Operation; Manual Operation Procedure - biodex 950-401 Application/Operation Manual

Heart Rate: Displayed at the top of the screen, this is the real-time heart rate of the user during
the exercise session measured using the contact handgrips.
Quick Setting Option for Speed Value: Clinicians and users have the option of bringing the
treadbelt to a designated speed without having to press the <▲> button multiple times. To use
this option, select the keypad located to the left of the Speed setting in the upper right corner
(see Figure 6.2). The keypad will appear on the screen for ten seconds. If a Speed Limit has
been enabled, the speed limit — in MPH or KMH — will appear at the top of the screen. Users
will not be able to select a number value that is higher than the speed limit. (For more
information on the Speed Limit setting, refer to the System Configuration section of this
document.) To set a speed, touch a number button. The window will close and the treadbelt
will start "ramping up" to that speed.
Figure 6.3.

Manual Treadmill Operation

Manual treadmill operation is easy. Like the Quick Start function, Manual Start allows the user
to begin exercising quickly. Rather than using default settings, however, this mode of
operation prompts the clinician to enter the patient's body weight, select the treadbelt
direction, and enter values for Time, Distance, and Calories. During the exercise, the user can
choose between Exercise Track or Numeric displays.

Manual Operation Procedure

NOTE: For all screens, <Next> advances to the next screen, <Back> returns the user to the
previous screen.
1. At the treadmill Opening Menu select <Manual Start>. The Setup Options screen is
displayed.
GAIT TRAINER 3 (v3.X SOFTWARE)
The Manual Start Setup Options screen allows entry of patient-specific
information and parameters.
49