Manual Mode Exercise Track And Numeric Display Parameters - biodex 950-401 Application/Operation Manual

2. At the Setup Options screen, touch the appropriate icons to enter information and select
treadbelt direction. In addition to the <▲> and <▼> arrows, a pop-up keypad can be
used to enter values for Distance, Calories, and Body Weight. Once the desired
information is entered/selected, touch <Next> to advance to the Exercise Track display.
3. Touch the Display icons at the lower left of the screen to toggle between the Exercise
Track display and a Numeric display.
4. With the Exercise Track or Numeric Display on the screen, touch the yellow dot next to
any heading or icon to change the value. To toggle between value settings (i.e., miles /
KM), touch the displayed parameter.
5. When all parameters are entered/selected, press <Start> on the display to activate the
tread-treadbelt and begin the exercise session. The treadbelt will ramp up to .1 mph.
6. Use the <▲> and <▼> arrows on the Exercise Track or Numeric Display to adjust the
speed setting to the desired value. Both speed and elevation can be adjusted at any
time during the exercise session.
7. Touch <Pause> to pause the exercise session at any time. Press <Resume> to resume
the exercise session.
8. Touch <End> to end the exercise session at any time.

Manual Mode Exercise Track and Numeric Display Parameters

The same parameters are displayed on both the Exercise Track and Numeric displays. A brief
explanation of these parameters can be found in the previous (Quick Start) section.
Figure 6.4.
50
The Exercise Track display.
Biodex Medical Systems, Inc. © 2017