Omron POWLI Instruction Manual page 71

7
. Using the UPS monitoring software and contact signal
* When connecting 2 or more computers to the UPS
UPS
Power cable
STATUS
LOAD/
BATTERY
POWER ON/OFF
BEEP STOP/TEST
OUTPUT
BATTERY
BU3002SWG BYPASS WEAK Power cable
Power cable
The included connection cable (RS-232C or USB)
2. Install the included UPS monitoring software on each computers.
Software to install: PowerAct Pro
How to install: Refer to the separate "UPS monitoring software installation guide".
● When using UPS Power Manager "UPS monitoring software for Mac"
1. Connect the UPS to a computer.
Cable: Included USB communication cable
* Only 1 computer can be connected to the UPS
2. Install the included UPS monitoring software on the computer.
Software to install: UPS Power Manager
How to install: Refer to the separate "UPS monitoring software quick installation guide".
<USB>
Connect to
USB
terminal
Connector
Connect to USB
port on PC
Included connection cable(USB)
58
Power cable
PC server 3
PC server 2
PC server 1
Remote connection
Connector
Connect to
USB Port
on UPS
BU1002SWG
LAN connection
Network
Switching hub
Connect to
USB
terminal
Connector
Connect to USB
port on PC
Included connection cable(USB)
Connector
Connect to
USB Port
on UPS
BU3002SWG