Table of Contents
Advertisement
6
. Maintenance and Inspection
7.
Attach the front panel.
Insert the lug at the bottom of the front panel into the hole in the main body ➀ and push it towards the
main body. ➁
Use a screwdriver to securely tighten (clockwise) the 2 screws at the top of the front panel. ➂
2
Battery replacement is now complete.
■ Procedure for recycling the battery
<BU3002SWG>
1.
Use a screwdriver to loosen (anti-clockwise rotation) the 4 screws on the front panel of the unit, until they
turn freely. (The screws cannot be removed from the front panel.)
Pull the front panel towards you to remove it. ➀
Loosen the
4 screws.
2.
Remove the battery connectors from the lower plate cover ➀ and disconnect each of the connectors. ➁
Battery connector
50
1
STATUS
LOAD/
BATTERY
POWER ON/OFF
BEEP STOP/TEST
OUTPUT
BATTERY
BYPASS
WEAK
1
Plate cover
1
Tighten the
2 screws.
3
1
2
Disconnect by holding here.
Advertisement
Table of Contents
