Brushless Electric Motor; Lipo Battery Charger; Adhesives, Hardware And Other Accessories; Replacement Parts List - GREAT PLANES PT-19 Instruction Manual

Brushless Electric Motor

The electric setup for the PT-19 is straightforward: a Great
Planes Electrifl y Rimfi re .32 on a 13 x 8 E prop with a minimum
60A ESC powered by a 4S LiPo battery in the 3300mAh –
4000mAh range. A Castle Creations Edge Lite 75* is illustrated
in the instruction manual because it is compact, easily
programmable and features data logging.
42-50-800 Rimfi re .32 (GPMG4700)
APC 13 x 8 thin E prop (APCQ3080)
Castle Creations Edge Lite 75 (CSEM1200)
FPWP2234 FlightPower 4S 3300mAh 25C
OR
FPWP2404 FlightPower 4S 4000mAh 25C
3/16" heat shrink tubing (GPMM1056)
T-style Star connector (HCAM4001)
Optional: Great Planes Aluminum Safety Spinner Nut
5/16"- 24 (GPMQ4631)
*NOTE: The PT-19 has been tested with the servos and ESC
recommended in this instruction manual. If you are using
different servos that draw more current than the BEC in
your ESC is recommended for (5A for the Edge Lite 75), or if
setting the BEC voltage in the ESC higher than the factory-
default 5.0V, one option is to use a voltage regulator with a
higher Amp rating that draws power from the 4S LiPo motor
battery (such as the Castle Creations 10A BEC - CSEM0005).
Another option is to use a receiver battery.

LiPo Battery Charger

To charge a 4S 4000mAh LiPo at 1C, a charger capable of
at least 70 Watts is required (4S x 4.2V/cell = 16.8V x 4A =
67 Watts). The Triton EQ2 (GPMM3156) is more than enough
charger with 100W output AC and 120W output DC.
Adhesives, Hardware and
Other Accessories
Other than common hobby tools here is a list of other items
required:
30-minute epoxy (GPMR6043)
Epoxy brushes (GPMR8060)
Mixing cups (GPMR8056)
Mixing sticks (GPMR8055)
Threadlocker thread locking cement (GPMR6060)
Thin CA (GPMR6001)
Medium CA (GPMR6007)
CA applicator tips (HCAR3780)
CA accelerator (GPMR6035)
Canopy glue (PAAR1300) or Zap Goo (PAAR3200)
A Robart Super Stand II (ROBP1402) is also indispensable
for working on your PT-19.
A covering iron with a cover sock may be required for
tightening and re bonding the covering to the model that may
have loosened between the time the plane was manufactured
and the time the model was removed from the box. The 21
Century iron is preferred because of its long cord, contoured
shoe and precisely adjustable temperature range:
Coverite 21 st Century Sealing Iron (COVR2700)
st
Coverite 21 Century Cover Sock (COVR2702)

REPLACEMENT PARTS LIST

Order No. Description
GPMA2555
Wing
GPMA2556
Fuselage
GPMA2557
Tail Surface Set
GPMA2558 Cowl Set
GPMA2559
Hatch
GPMA2560
Windscreen Set
GPMA2561
Landing Gear Set
GPMA2562 Rollover Pylon
GPMA2563
EP Motor Mount Parts Set
GPMA2564
Fuel Tank
GPMA2565
Landing Gear Covers Set
GPMA2566
Decals
TOWA4077 10-24 x 2" Nylon Wing Bolts (2)
GPMA5406
Tail Gear Set
3
st