Battery Pack - NTT docomo XPERIA A SO-04E with Series Instruction Manual

Open the microSD card slot cover,
2
press the microSD card until it
clicks, and slowly pull it out.
" Removed SD card" shown on the
･
status bar notifies that the microSD
card is removed.
Close the microSD card slot cover,
3
firmly press it and make sure that
there are no gaps between the
terminal and cover (P.33).
❖ Information
If the microSD card is removed without being
･
unmounted, " SD card unexpectedly removed"
appears on the status bar. In such a case, files may be
damaged or data may be lost.

Battery pack

When attaching/removing the battery pack,
･
make sure to power off the terminal. Do not
connect the AC adapter.
Attaching battery pack
Insert the tip of your finger into
1
the groove at the bottom of the
terminal, and lift up the back cover
(P.26).
Check the position of charging
2
contacts of the battery back, and
align the tabs of the terminal with
those of the battery pack, then
insert it in the direction of the
arrow ( ).
Attach the back cover, then make
3
sure there are no gaps (P.26).
Before Using the Terminal
34