MakerBot Replicator+ Reference Manual page 9

https://www.supplychimp.com/
• Safety precautions •
Protect mains cable against heat, oil and
sharp edges!
Standard machines are factory-set as follows:
• Voltage 400 V (220 V) 3 phase
• Frequency 50 Hz (60 Hz).
A
Machine does not function
E
• Is the machine switched on?
D
• Is the key-switch on.
a
• Is the green overload switch pressed?
b
• Is the black overload switch pressed?
• Check on-site fuse.
If the machine still does not function then the
rotation must be reversed.
The machine is wired according to the IEC
standards. We recommend that alterations to
the rotary direction be made in the socket. It is
also possible to make alterations in the plug by
exchanging "L1" and "L2".
Danger!
Incorrect exchanging of the connections
will endanger the operator.
This work must be carried out by an
electrician.
- 9 -