Table of Contents
Advertisement
Console Management
Trunk Group Configuration
Figure 5.28 Trunk Group Configuration Menu
This menu allows you to monitor and configure the switch's Trunk
Groups. Choose a trunk group ID and name and select the ports to
be included in the group.
The switch provides a Port Trunking algorithm that supports two or
more 100 Mbps ports to be connected in parallel between switches,
which increases the overall bandwidth between the devices. Each
trunk group uses a single STP port instance (STP port 28). However,
the port control state is separate.
User Authentication
Up to 6 User Authentication configuration can be set up. The User
Name of up to 12 characters can be entered after selecting an index
number and pressing Enter.
5-37
Advertisement
Table of Contents
