Trunk Configuration; Port Mirroring Configuration - Planet WSW-2401 User Manual

3.5-3 Trunk Configuration

You can configure port trunk group
Ø
Select <Edit>
Ø
Use TAB key move to the port that you want to add as trunk group
Ø
Use Space key to mark the port
Ø
Use TAB key move to trunk# (eg turnk 1, trunk 2...etc) to change the trunk# value to
Static or LACP
Ø
Press<Save> to save the configuration

3.5-4 Port Mirroring Configuration

You can configure Port mirroring function
Ø
Select<Edit>
Ø Mirroring State: The default value is "disable". To enable port mirroring you must select
one of port mirror:
l
RX: RX packet only
l
TX: TX packet only
l
Both: RX and TX packet
Ø
Analysis Port: All of the packets of mirroring port will be duplicated and sent to Analysis
port
Ø
Port State: select the ports that want to mirrored
Ø
Use Space key to mark the port that want to mirrored
Ø
Press<Save> to save the configuration
14