Expansion Slot; Optional Modules - Planet WSW-2620 Manual

1-2
w Ports
•
24 10BASE-T (RJ-45) ports
•
1 10BASE-T/100BASE-TX auto-sensing port (RJ-45)
•
1 MDI-II Uplink port (RJ-45) shared with port 1
•
2 expansion slots allow you to add 10BASE-T/100BASE-
TX or 100BASE-FX ports
•
1 EIA-232 port
w Expansion Slot
Switch WSW-2620 provides two expansion slots for the addition of
2 10BASE-T/100BASE-TX MDI-II or MDI-X ports or 1 100BASE-
FX port.
w Optional Modules
The following two types of expansion modules are available for this
system.
Note: The power must be turned off before inserting or
removing Modules.
•
Module WSW-BTX
This 10BASE-T/100BASE-TX module with two RJ-45
connectors is configured for either MDI-II or MDI-X.
Figure 1.1 Module WSW-BTX
Non Printing
Introduction