Table of Contents
Advertisement
5-22
Follow these steps to add or edit a static MAC address:
1. Use the Tab key to select a MAC address. If there are no MAC
addresses assigned, use the Tab key to highlight a space under
the Mac Address column.
2. Press Enter to edit.
3. Configure the MAC address, VLAN ID, Port ID and Admin
Status columns.
4. Select UPDATE.
5. Select EXIT.
6. Repeat steps 1 through 5 for each MAC address.
Note: There are 2 pages of MAC addresses. At least one MAC
address must be entered in the first page before the second
page can be entered. Use the Next Page command to enter
the second page.
Follow these steps to delete a MAC address:
1. Select the MAC address you want to delete.
2. Press Enter.
3. Select DELETE.
4. Press Enter.
5. Select EXIT.
Console Management
Advertisement
Table of Contents
