Planet WSW-2620 Manual page 31

Mini-Console
3. Enter the four-digit password. (See the table below illustrating these
steps.)
4. Press the Enter console key. You will see "OK" displayed for a moment,
then "CONSOLE LOCK" will be displayed.
5. To return to the main menu, press the Next console key until "MAIN
MENU" appears in the message zone and press the Enter console key.
6. If you entered your password incorrectly, press the Next again. The
"____PSW" message will change to "____BACK." Pressing the Next
key again will return you to the first password digit. Repeat steps 3 and
4 to enter the correct password.
The following table illustrates the procedures for unlocking the Mini-Console.
Sub Menu
SYS LOCKED
Example: This examples illustrates the steps necessary for unlocking the
console for the password "0121". (The factory default password is
"0000".)
MAIN MENU
UNIT CONFIG
Displayed Prev key
****_PSW Scroll through
numbers 0~9
Displayed Prev key
***_PSW Press once
*
0 **_PSW Press twice
*
01 *_PSW Press three times
*
012 _PSW Press twice
*
0121_PSW Press the Enter console key
OK OK will be displayed for a moment
CONSOLE The Mini-Console is now
LOCK unlocked.
Figure 3.8 Unlock Console
3-17
Next key
Move to next
password
digit
Next key
Press once
Press once
Press once
Don't press
WSW-2620 User Guide