Table of Contents
Advertisement
5-42
9. In the Switch Port Used to Communicate with TFTP Server
field, enter the switch port number that your TFTP server
enabled computer is connected to.
Note: The switch port used to communicate with the TFTP
server enabled computer must be in VLAN #1.
10. Tab to SAVE and press Return. Tab to EXIT and press Return.
11. In the System Utility Menu, select System Restart and press
Return.
12. Select Cold Restart then select Execute. Press Return. Press
Return again to execute the cold restart. The switch will now
execute the software download. This process will take several
minutes. Do not attempt to issue any commands until the Login
screen appears.
Note: If the Login Screen text is unusual after a software
download, simply disconnect and reconnect your
terminal emulation program.
13. At this point, you should conduct a ping from the terminal you
are using to ensure that the new software is configured properly.
Note: If the ping is timed out, simply plug your Ethernet
connection into a different port and conduct another ping.
14. You new software is now installed and functioning properly.
Console Management
Advertisement
Table of Contents
