Table of Contents
Advertisement
Console Management
Note: Before executing a system software download, be sure that
the TFTP server on the remote computer is enabled.
Executing a System Download
Follow these steps to perform a system software download:
1. Copy the switch software files to a computer's C drive. Be sure
that the computer you are using is connected to the switch and
that the TFTP server is enabled.
2. In the System Download Menu, if you want to use your
network's Bootp server, select the Bootp Request option by
typing Ctrl+S to place and X in the Bootp Request check box. If
you do not want to use your network's Bootp server, or if your
network does not have an enabled Bootp server, be sure that the
Bootp Request option is not selected.
3. Tab to the TFTP Server IP Address field. In this field, enter the
IP address of the computer that contains the software files.
4. Tab to highlight the Boot ROM Code Download check box. If
you want to download new Boot ROM code, type Ctrl+S to
place and X in the check box. Tab to File Name and enter the
complete file path and name.
5. Tab to highlight the Web-Pages Database Information
Download check box. Type Ctrl+S to place and X in the check
box. Tab to File Name and enter the complete file path and
name.
6. Tab to highlight the System Software Download check box.
Type Ctrl+S to place and X in the check box. Tab to File Name
and enter the complete file path and name.
7. Tab to SAVE and press Return. Tab to EXIT and press Return.
8. In the System Utility Menu, select Download Port Setting and
press Return.
5-41
Advertisement
Table of Contents
