Filter Panels And Lamps; Cleaning Plan - ergoline OPEN SUN PILOT EXTREME POWER Operating Instructions Manual

12/2011 1004193-02
WARNING!
Acrylic glass panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
– Remove fingerprints and other soiling carefully.
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
simply use warm water and a leather cloth. Never use aggressive cleaning
agents containing alcohol or essential oils. These may lead, in the long run, to
damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber seals
must be expected for production-related reasons.
Prevent damage to the acrylic glass and plastic surfaces.
– Remove rings, watches, bracelets etc. before starting cleaning work.
5.3.2

Filter panels and lamps

UV low pressure lamps and filter panels can be cleaned with a damp
cloth and without additional cleaning agents where necessary.
UV high pressure lamps can be cleaned with ethyl alcohol where neces-
sary.
5.4

Cleaning plan

Cleaning and maintenance
Operating instructions – 33/62