12/2011
1004193-02
–
Pull out the lamp.
–
Clean the reflector.
–
Only utilize original lamps.
–
Only touch new lamps in the handling zone.
–
Test the safety switch to ensure that it works.
The safety switch ensures that the device switches off in the event of a
faulty filter panel or when a filter panel is missing.
–
Press the button.
If the button springs back automatically then it is functional.
–
Clean the filter panel.
The assembly is the same process in reverse order.
When assembling please note:
–
Remove fingerprints and other soiling carefully.
Cleaning and maintenance
Operating instructions – 41/62