4.9.11.1 QoS Control Entry Configuration
The QCE Configuration screen in
The page includes the following fields:
Object
Port Members
Key Parameters
Figure 4-9-13
appears.
Figure 4-9-13: QCE Configuration Page Screenshot
Description
Check the checkbox button in case you what to make any port member of the
QCL entry. By default all ports will be checked
Key configuration is described as below:
Tag Value of Tag field can be 'Any', 'Untag' or 'Tag'.
VID Valid value of VLAN ID can be any value in the range 1-4095 or
'Any'; user can enter either a specific value or a range of VIDs.
PCP Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5,
6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
DEI Drop Eligible Indicator: Valid value of DEI can be any of values
between 0, 1 or 'Any'.
SMAC Source MAC address: 24 MS bits (OUI) or 'Any'.
DMAC Type Destination MAC type: possible values are unicast(UC),
multicast(MC), broadcast(BC) or 'Any'.
Frame Type Frame Type can have any of the following values:
1.
Any
2.
Ethernet
User's Manual of MGSW-MGSD Series
218