Ptp (Mgsw-28240F Only); Ptp Configuration - Planet Networking & Communication MGSW-28240F User Manual

4.18 PTP (MGSW-28240F Only)

4.18.1 PTP Configuration

PTP is an acronym for Precision Time Protocol, a network protocol for synchronizing the clocks of computer systems. This page
allows the user to configure and inspect the current PTP clock settings.
The page includes the following fields:
Object
 One_PPS_Mode
 External Enable
 VCXO_Enable
Figure 4-18-1: PTP External Clock Mode page screenshot
Description
This Selection box will allow you to select the One_pps_mode configuration.
The following values are possible:
1. Output : Enable the 1 pps clock output
2. Input : Enable the 1 pps clock input
3. Disable : Disable the 1 pps clock in/out-put
This Selection box will allow you to configure the External Clock output.
The following values are possible:
1. True : Enable the external clock output
2. False : Disable the external clock output
This Selection box will allow you to configure the External VCXO rate adjustment.
The following values are possible:
1. True : Enable the external VCXO rate adjustment
2. False : Disable the external VCXO rate adjustment
User's Manual of MGSW-MGSD Series
348