Planet Networking & Communication MGSW-28240F User Manual page 105

The page includes the following fields:
Object
 Type
 Speed
 Wave Length(nm)
 Distance(m)
 Temperature (C)
 Voltage (V)
 Current (mA)
 TX Power (dBm)
 RX Power (dBm)
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
Description
Display the type of current SFP module; the possible types are:

10GBASE-SR

10GBASE-LR

1000BASE-SX

1000BASE-LX

100BASE-FX
Display the speed of current SFP module. The speed value or description is
gotten from the SFP module. Different vendors of SFP modules might show
different speed information.
Display the wavelength of current SFP module. The wavelength value is gotten
from the SFP module. Use this column to check if the wavelength values of two
nodes are matched while the fiber connection is failed.
Display the support distance of current SFP module. The distance value is gotten
from the SFP module.
Display the temperature of current SFP module. The temperature value is gotten
from the SFP module.
Display the voltage of current SFP module. The voltage value is gotten from the
SFP module.
Display the ampere of current SFP module. The ampere value is gotten from the
SFP module.
Display the TX power of current SFP module. The TX power value is gotten from
the SFP module.
Display the RX power of current SFP module. The RX power value is gotten from
the SFP module.
105
User's Manual of MGSW-MGSD Series