Planet Networking & Communication MGSW-28240F User Manual page 108

The page includes the following fields:
Object
 Port to mirror on

Port

Mode
For a given port, a frame is only transmitted once. It is therefore not possible to mirror Tx frames on
the mirror port. Because of this, mode for the selected mirror port is limited to Disabled or Rx only.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Description
Port to mirror also known as the mirror port. Frames from ports that have either source
(rx) or destination (tx) mirroring enabled are mirrored on this port. Disabled disables
mirroring.
The logical port for the settings contained in the same row,
of Managed Switch.
Select mirror mode.

Rx only: Frames received at this port are mirrored to the mirroring port.
Frames transmitted are not mirrored.

Tx only: Frames transmitted from this port are mirrored to the mirroring port.
Frames received are not mirrored.

Disabled: Neither frames transmitted nor frames received are mirrored.

Both: Frames received and frames transmitted are mirrored to the mirror port.
108
User's Manual of MGSW-MGSD Series
*
means selection of all ports