Toshiba HWS-P804XWHM3-E1(TR) Service Manual page 155

Exchange parts
No.
name
2 Outlet cabinet
3 Side cabinet
AMP Air Conditioning
Work procedure
How to remove
1) Perform the step 1-1.
2) Remove the screws of the outlet cabinet and
parting board.
(ST1T Ø4 × 8, 4 screws)
3) Remove the screws of the outlet cabinet and
bottom board.
(Hex Ø4 × 10, 2 screws)
4) Remove the screws of the outlet cabinet and
motor base.
(ST1T Ø4 × 8, 2 screws)
5) Remove the screws of the outlet cabinet and heat
exchanger.
(ST1T Ø4 × 8, 1 screws)
6) Remove the screws of the outlet cabinet and fin
guard.
(Hex Ø4 × 10, 2 screws)
1) Perform the step 1-1.
2) Remove the screws that fixes the inverter
assembly and the side cabinet.
(ST1T Ø4 × 8, 2 screws)
3) Remove the screws of the side cabinet and valve
fixing board.
(ST1T Ø4 × 8, 2 screws)
4) Remove the screws of the side cabinet and piping
panel (back).
(Hex Ø4 × 10, 2 screws)
5) Remove the screws of the side cabinet and bottom
board.
(Hex Ø4 × 10, 1 screws)
6) Remove the screws of the side cabinet and fin
guard (heat exchanger).
(Hex Ø4 × 10, 5 screws)
7) Remove the side cabinet while shifting it upward
(inverter hook).
Heat exchanger
Fin guard
Inverter assembly
Valve fixing board
154
www.ampair.co.uk | sales@ampair.co.uk
Remarks
Outlet cabinet
Motor base Paring board
Side cabinet