Toshiba HWS-P804XWHM3-E1(TR) Service Manual page 127

• Auto-Curve temperature shift
Without Auto-Curve individually set, the set temperature can be
shifted in the range of ±5k of the current setting. (The set temperature
is valid only when Auto operation is in progress. It also applies to
Zone 2.)
1
Press the AUTO TEMP
longer. (See display
(The remote controller FC setting screen appears.)
2
Set a temperature shift range with the TEMP.
button for temperature setting. (-5k to 5k)
3
Press the SET
confirmed)
4
Pressing the TEST
stop state.
5. Time Setting
1
Press the TIME
screen moves to the time setting mode.) (See display
Day, time, , and
(Time setting is available during an operation.)
2
Specify a day to be set.
Press the DAY
The symbol moves along above the days. (
button press from MO through SU.)
3
Set time.
Use the TIME
display by 10 minutes.
4
Pressing the SET
the time setting changes the days and time to the lit state
and returns to the normal display.
and indications go out.)
AMP Air Conditioning
button for 4 seconds or
)
button. (If lights, the status is
button moves the unit to the normal
button for 4 seconds or longer. (The
indications blink.
button to select the current day.
button to set time. Long press changes time
button ends the time setting. Ending
2
)
moves by each
1
4
126
www.ampair.co.uk | sales@ampair.co.uk
3 4 1
3 2