8. NIGHT Operation Setting
For night time hours, this setting changes set temperature of heating or cooling by 5k as save operation.
1
Press the ZONE1,2
operation. (See display
(Night time operation is not available for hot water supply. Use the
schedule operation.)
2
Pressing the NIGHT
A night time operation lowers the set temperature by 5K for heating and
raises 5K for cooling during the set time period from 22:00 to 6:00
(Default).
3
Pressing the NIGHT
and the normal operation starts.
<How to set NIGHT operation start and end time>
1
Press the NIGHT
(Moves to the NIGHT time setting mode)
"0E" in the Code No. field and the current time displayed blink.
2
Press the TIME
Pressing SET
confirmed.
3
Press the TEMP.
(The codes "0E" and "0F" only can be changed.)
4
Press the TIME
Pressing SET
confirmed.
5
Press the TEST
mode.
AMP Air Conditioning
button to start a heating or a cooling
)
button displays the
button again makes
button for 4 seconds or longer.
(See display
button to set a desired start time.
changes the time to be lit and the setting is
button to change Code No.
button to set a desired end time.
changes the time to be lit and the setting is
button to exit the NIGHT time setting
symbol.
disappear,
)
3
2,
4
129
www.ampair.co.uk | sales@ampair.co.uk
2,3
1
1 5