Table of Contents
Advertisement
Fiber Port Redundancy
Link status auto-detect and redundant on dual ports with the same
connector type
Only when primary port is active, the backup port is blocked.
When primary port link fails, the traffic will swap to backup port
automatically.
Once the primary port status is back to link up, the traffic swaps
from backup port to primary port.
1.4 Product Specifications
Model
Hardware Specifications
10/100/1000BASE-T
Ports
SFP Interfaces
Dimensions
(W x D x H)
Weight
Power Requirements
Power Consumption
/ Dissipation
Installation
Switch Specifications
Switch Processing
Scheme
MAC Address Table
Flow Control
Switch Fabric
4
2 1000BASE-SX/LX/BX SFP interfaces
(Port-5 and Port-6)
Compatible with 100BASE-FX SFP
135 x 87 x 32mm
503g
DC 12~48V, Redundant power with polarity
reverses protection function. AC 24V Power
Adapter
7.2 watts/24BTU
DIN rail kit and wall mount ear
Store-and-Forward
1K entries
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
12Gbps
IGS-620TF
7
Advertisement
Table of Contents
