Perform Printing; Double-Click - MIMAKI TX300P-1800 Print Manual

Perform printing

Here, the printing method using a sample image included in the CD of the Tx300P-1800 Operation Manual.
• Check
sticker.
1.

Double-click

• The main window of the attached RasterLink is displayed.
2.
Set the CD of Tx300P-1800 Operation Manual into the disk drive.
3.
Click [Print Guide / Sample data].
• The "Print Guide and Sample Data" dialog is displayed.
4.
To select the data you want to print from the RasterLink, select [File],
and then [Open] from the menu.
• The "Select file name to print" dialog is displayed.
5.
Select the file to be printed, and click [Open].
• If more than one printer is registered, select [Tx300P] from [Printer Name].
• For details on the favorites setting, refer to
• The file is loaded. The loaded file is displayed on the [Tx300P] tab in the main window.
P. 2 to P. 4 "First, confirm the following items:"
to start the attached RasterLink.
without fail before creating a seal/a
Reference Guide of the attached RasterLink.
- 6 -