Perform Printing - MIMAKI JV300-130 BS INK Print Manual

Perform printing.

Here, an example using the image "sample.eps" is explained.
• Check
1.
Double-click the icon of the RasterLink to start the RasterLink.
2.
Select [File] - [Open] from the menu.
• The [Select file name to print] dialog is displayed.
About sample images
• For JV300-130/160 BS INK MODEL
Prepare any image data, or use the sample images on the instruction manual CD.
(1) Set the CD of the printer "Operation Manual" into the disk drive.
(2) Double-click on the "\English\PrintGuide and SampleData" folder.
• Sample data is displayed.
• For JV300-130/160 Plus BS INK MODEL
Prepare any image data.
3.
Select the file to be printed, and click [Open].
• From here, the procedure when the JV300-130/160 BS INK MODEL is connected is explained.
• If more than one printer is registered, select "JV300 BS INK MODEL" from [Printer Name].
• For details on the favorites setting, refer to
• The file is loaded. The loaded file is displayed on the [JV300 BS INK MODEL] tab in the main window.
P. 3 to P. 5 "Preparation before use." without fail before creating a seal/a sticker.
"Reference Guide" of the RasterLink.
- 7 -