ergoline Vitamin D3 Operating Instructions Manual page 104

Changing presettings with a hand-held unit
Some data can also be displayed and changed with a commercially avai-
lable hand-held unit (e.g. from Palm). For this purpose you require spe-
cial software (available in German and English), which you can download
at www.ergoline.de. The operating manual for this software is also avai-
lable at the same website.
Caution!
The code for access via the infrared interface is preset in the
software of the hand-held unit, and can therefore be used with
any unit. Anyone, who downloads the software from the Internet
can access the unit date with a hand-held unit. Please note that
Customer Service changes the preset access code during initial
start-up – see software operating manual. Please note the new
code for future use!
This code is independent of the access code for the presettings
via the control panel.
Note:
Please read the operating manual for the Ergoline software for
instructions on how to display or change data with a hand-held
unit.
Information on operating the hand-held unit is contained in the manufac-
turer's documentation.
103