5. Assembly Diagram
n 4 Way CST
Step1. Open control front panel.
Step3. Open the cover of PRIP0 and connect wires.
Note: While connecting the PRIP0, attach insulation at the rear of the control box cover
where it receives screws as shown in Fig. A.
CAUTION
Check the attached direction to the indoor unit.
12 Independent Power Kit
Step2. Assemble PRIP0 with cabinet.
Step4. Assemble control box cover and front panel.
L
Fig. A
Control box cover
(Unit : mm)
chassis
L
TQ/TR
630
TP/TN/TM
900
Insulation
screw