LG PRIP0 Installation Manual page 14

5. Assembly Diagram
n Wall mounted & Art cool
Step1. Mount relay kit on the wall.
CAUTION
Do not install PRIP0 at places exposed to rain or any water.
Other wise it may leads to electric shock, fire, injury or sometimes even fatality.
CAUTION
Independent power kit should be installed within 1000mm which is length of the given wires.
Otherwise Indoor EEV may cause malfunction.
n Hydro Kit
Step 1. Open the front panel of the control box.
14 Independent Power Kit
Step2. Connect wires (use a piping or wiring hole) and
assemble cover.
D < 1000 mm
Step 2. Assemble the cover of PRIP0, fix it tightly with bolts
and connect wires.