Bernette b33 Instruction Manual page 4

IMPORTANT
The following basic safety precautions must
be observed when operating an electrical
device:
Please read the instruction manual carefully
before using this machine.
Keep the instruction manual at a suitable
place with the machine and hand it over if you
give the machine to a third party.
When the machine is not in use or left
unattended, always
machine from the power supply system.
Unplug it from the outlet.
DANGER!
To reduce the risk of electric shock:
1. Never leave the machine unattended
when it is plugged in.
2. Always unplug this machine from the
electric outlet immediately after using
and before cleaning.
3. LED RADIATION: Do not look directly at
the LED using an optical instrument.
WARNING!
To reduce the risk of burns, fire, electric shock
or injury to persons:
1. The machine mustn't be used by chil-
dren under 8 or by people with reduced
physical, sensory or mental capabilities
or if there is a lack of experience and
knowledge how to operate the machine.
Unless they have been given instruction
concerning the use of the machine and
the involved risks by a person who is
responsible for their safety.
2. Do not use this machine as a toy. Close
attention is necessary when this machine
is used by children, near children or
people with reduced sensation.
3. Use this machine only for its intended
use as described in this manual. Use
only accessories recommended by the
manufacturer.
4. Children should be supervised to ensure
that they do not play with the machine.
5. Never operate this machine if it has a
damaged cord or plug, if it is not working
4
6. Never operate the machine with any air
disconnect the
7. Keep fingers away from all moving parts.
8. Always use the proper stitch plate. Using
9. Do not use bent needles.
10. Do not pull or push the fabric while sew-
11. Switch the machine off ("O") when mak-
12. Always unplug the machine when per-
13. Never drop or insert any object into any
14. Use this machine only in dry and pro-
15. Do not operate the machine where aero-
16. To disconnect, turn the power switch to
17. If the supply cord of the foot control is
18. Never place anything on the foot control.
19. When replacing the light bulb, always
properly, if it has been dropped or dam-
aged, or dropped into water. Return the
machine to the nearest authorized dealer
or service centre for examination, repair,
electrical or mechanical adjustment.
openings blocked. Keep ventilation open-
ings of the machine and the foot control
free from accumulation of lint, dust, and
loose cloth.
Special care is required around the
machine needle.
the wrong stitch plate can result in nee-
dle breakage.
ing. This can result in needle breakage.
ing any adjustments in the needle area,
such as threading or changing the nee-
dle, threading the bobbin, or changing
the presser foot, and the like.
forming cleaning or maintenance work-
such as replacing the sewing light or
when making any other user mainte-
nance adjustments mentioned in the
instruction manual (disconnect the power
plug). Cleaning and maintenance work
must not be carried out by children with-
out supervision.
openings.
tected areas. Never operate the machine
in a damp or wet environment.
sol spray products are being used or
where oxygen is being administered.
("O")(off), then remove the plug from the
outlet. Do not unplug by pulling the cord,
instead grasp the plug to pull it from the
outlet.
damaged, it must be replaced by the
manufacturer or an appropriate service
agent or a similar qualified person in
order to avoid endangerment.
use the same type.