Page 2
Protection against LED radiation: • Do not view the LED light directly with optical instruments (e.g. magnifier). The LED light corresponds with protection class 1M. • When the LED light is damaged or defective, contact your bernette specialist dealer. WARNING To reduce the risk of burns, fire, electric shock or injury to persons: •...
Page 3
– turn power switch to «0». • Do not use bent needles. • Always use the original bernette stitch plate. The wrong stitch plate can cause needle breakage. • To disconnect, turn power switch to «0» and then remove the plug from the outlet.
Page 4
• When passing on the machine to a third party, enclose the quick start guide of the machine. Proper use Your bernette machine is conceived and designed for private household use. It answers the purpose to quilt fabrics as it is decribed in this instruction manual. Any other use is not considered appropriate.
Overview of the machine Stitch selection dial ① Stitch length dial ② Stitch width dial ③ Needle position dial ④ Presser foot pressure ⑤ dial Reverse sewing lever ⑥ Needle threader ⑦ Buttonhole lever ⑧ Hand wheel ⑨ Balance dial ⑩ ...
Maintenance Clean machine surface b05 CRAFTER b05 ACADEMY b05 CRAFTER b05 ACADEMY Do not use any organic solvents or detergents. Clean the feed dog b05 CRAFTER b05 ACADEMY...
Page 20
Clean the hook b05 CRAFTER b05 ACADEMY b05 CRAFTER b05 ACADEMY...
Page 21
Oiling the needle bar b05 CRAFTER b05 ACADEMY Attention After removing the face cover be careful of the moving parts. b05 CRAFTER b05 ACADEMY...
Reduce the upper thread tension. Incorrectly threaded. Rethread. Upper thread breaks Poor quality thread. Use quality thread. The stitch plate or the hook tip is - Contact a specialized bernette dealer damaged. to have the damages repaired. - Replace the stitch plate.
Page 23
Bobbin is wound incorrectly. Check bobbin and thread correctly. Lower thread breaks The stitch hole in the stitch plate - Contact a specialized bernette dealer is damaged. to have the damages repaired. - Replace the stitch plate. Needle blunt or bent.