Sewing Buttons - Bernette b33 Instruction Manual

e
e
s
c
a

Sewing Buttons

Stitch selection:
Presser foot:
Thread tension:
Stitch length:
Feed dog:
Lower the feed dog.
Match the holes in the button with the horizontal
slot on the presser foot.
Adjust the stitch width matching the distance of the
holes in the button.
Lower the foot to hold the button in place. Check to
see if the needle enters into the holes in the button
by turning the handwheel by hand.
Sew about ten (10) stitches.
To strengthen the shank, cut the threads leaving
about 4.0˝ (10.0 cm). Bring the needle thread down
through one of the holes in the button and wind it
around the shank. Bring the needle thread to the
wrong side (bottom side) and knot.
C
Button-sew-on foot
3 – 7
0
Lowered
21