DeFelsko PosiTector6000 Manual page 8

Two Probe Styles:
* Integral - sensor protrudes from bottom of probe connector
* Cabled - sensor is attached to the probe connector by a
Available PosiTector 6000 Probes:
"Regular" - These constant-pressure, stainless
steel probes are hermetically sealed to be totally waterproof -
ideal for underwater use.
"Micro"
-
hard-to-reach areas. Available in 0, 45 or 90 degree angles.
"Thick" - ideal for thick, protective coatings.
"Xtreme" - ideal for measuring rough and/or hot surfaces up to
250° C (500° F).
For complete details, see:
http://www.defelsko.com/p6000/p6000_probe_details.htm
Additional PosiTector Probes:
The PosiTector body accepts a wide variety of probe types
including magnetic, eddy current and ultrasonic coating thickness,
surface profile,environmental, Shore hardness durometer, salt
contamination and ultrasonic wall thickness probes.
www.defelsko.com/probes
PosiTector bodies accept all PosiTector DPM, 6000, 200, SPG,
RTR, SST, SHD and UTG probes
1.2 meter (3 foot) cable.
(Extended cables lengths available.)
ideal for measuring
5
small parts and
See