Sync.net Now; Bluetooth Smart - DeFelsko PosiTector6000 Manual

Sync .net Now
The below WiFi, USB and Bluetooth menus contain a Sync .net
Now option. When selected, the Gage immediately synchronizes
stored measurement data via its respective communication
method (internet connection required).
Alternatively, select Auto Sync .net from within the USB connect
menu to automatically synchronize upon connection to a PC.
Additional measurements added to memory while connected are
synchronized only when the USB cable is disconnected and
reconnected, or when the Sync .net Now option is selected.
WiFi connected gages automatically attempt synchronization
upon power-up.
NOTE: PosiSoft Desktop (pg. 24) is required when using USB
or Bluetooth connections to synchronize measurements with
PosiSoft.net.

Bluetooth Smart

When Enabled
running the PosiTector App (pg. 24) via auto-pairing Bluetooth
Smart (BLE) wireless technology.
Select
PosiTector App. New batches created while Bluetooth Smart is
enabled are automatically selected.
Sync Batches
With Bluetooth Smart enabled, select Sync Batches to transfer
selected batches to the PosiTector App. This is useful when
switching between smart devices, as only readings and batches
that have yet to be synchronized with any smart device are syn-
chronized automatically.
NOTE: If Bluetooth Smart is disabled, data from batches select-
ed in the Sync Batches menu are held in a queue until commu-
nication with the PosiTector App is re-established.
(Advanced models only, serial
numbers 784000 and greater)
, allows communication with a smart device
batches to flag them for synchronization to the
28