Additional Accessories; Bluetooth Wireless Printer - DeFelsko PosiTector6000 Manual

AC Power Cable Kit
An optional AC Power Cable Kit is available for continuous
operation or battery charging through the PosiTector's built-in
USB port (as shown on pg. 24). This kit supplies several alternate
power solutions for your battery-operated PosiTector. They allow
the gage to operate continuously without the need for batteries.
Use the cable alone to connect a PosiTector to your PC's built-in
USB port that acts as a continuous power source. Or connect the
cable to the included power adaptor which plugs into any AC wall
electrical outlet, 110 or 220V.
A selection of electrical plugs is included which are capable of
dealing with most country's outlets.The USB cable provided can
also be used for Accessing Stored Measurement Data
(See pg. 24).
USB Cable
A USB Cable is provided with every PosiTector.

Bluetooth Wireless Printer

PosiTector Advanced models can output to
the optional battery powered Bluetooth
wireless printer one of two ways:
• Stream individual readings as they are taken.
• Print stored batch readings and summaries.
Begin by entering the Connect > Bluetooth menu. Turn Bluetooth
ON
and
See: www.defelsko.com/bluetooth
Streaming: In the Connect > Bluetooth menu, select the Stream
tick box. All readings will now be simultaneously displayed on the
LCD and sent to the printer.
Printing: In the Memory menu, select Print.

Additional Accessories

"Pair" the
PosiTector
32
to the printer.