SeeMeCNC Rostock Max v3 Setup Manual page 2

Rostock Max v3 RTP User Guide
INTRODUCTION
Congrats on your new Factory Assembled Rostock Max v3! This guide will help you in getting started
with your new machine.
Your machine was fully assembled, calibrated and printed successfully before it left our factory.
Please make sure there are no damages to your new Rostock Max v3. Inspect it carefully for any
broken parts. If you find any damages please STOP and contact the company that you purchased it
from immediately. Please include your order number when contacting them as it helps to speed up
the process.
Your machine was fully assembled, calibrated and printed successfully before it left our factory. We
have done some things to make sure the machine does not get damaged while shipping the printer.
Please complete the following steps:
© 2017 seemecnc.dozuki.com Page 2 of 11