SeeMeCNC Rostock Max v3 Setup Manual page 5

Rostock Max v3 RTP User Guide
Step 4 — Remove the Glass Build Plate
Step 5 — Remove Accessories from Glass Plate
Carefully remove all shrink wrap from the glass build plate. Be careful not to cut the accessories

(or yourself) if you are using a knife.
Replace the glass build plate back on the printer.

Rotate the [BLUE] bed clamps to clamp the glass build plate down.

© 2017
Rotate the [BLUE] bed clamps to

remove the glass build plate and
accessories from the printer.
Remove the glass plate from the

printer.
seemecnc.dozuki.com Page 5 of 11