Advertisement
Rostock Max v3 RTP User Guide
Step 10 — USB Connection (Advanced)
The Rostock Max v3 is equipped with a USB connection and cable. This is intended to be used as
a connection for updating firmware and manually control the machine when diagnosing issues is
required.
Printing via the provided SD card is considered to be a significantly more stable than printing via
the USB connection. We highly encourage the use of printing via the SD card.
© 2017
seemecnc.dozuki.com
Page 8 of 11
Advertisement
Need help?
Do you have a question about the Rostock Max v3 and is the answer not in the manual?