Advertisement
Non-contact AC Voltage Test (NCV)
1. Set the function switch to the ON position.
2. Remove the meter and face the NCV detector to ACV
source.
3. If source votalge in 50-1000V the NCV indicate lamp will
light.
7. MAINTENANCE
Battery and Fuse Replacement
If the sign "
that the battery should be replaced. Remove screws on the
back cover and open the case. Replace the exhausted
battery with new batteries. (1 x 9V battery NEDA 1604, 6F22
or equivalent)
Fuse rarely need replacement and blow almost always as a
result of the operator's error. Open the case as and replace
the blown fuse with ratings specified.
Warning:
Before attempting to open the case, be sure that test leads
have been disconnected from measurement circuit to avoid
electric shock hazard.
Replace fuse only with specified ratings:
Fuse1: F 10A / 600V fast blow.
Fuse2: F 500mA / 660V fast blow.
" appears on the LCD display, it indicates
21
Advertisement
