Advertisement
Measuring AC Voltage
1. Insert the black test lead banana to the COM jack and
red test lead banana to the "V/Hz%/ /Cap/ °C" jack.
2. Set the function switch to the green at AC ranges to be
used and connect test leads connect test leads across
the source or load under measurement.
3. Read LCD display. The polarity of red connection will be
indicated when making a AC measurement.
4. Press the Hz% button to indicate "Hz".
5. Read the frequency in the display.
6. Press the Hz% button again to indicate "%".
7. Read the % of duty cycle in the display.
Measuring DC Current
1. Insert the black test lead banana plug into the negative
COM jack.
and the red test lead banana plug into the "μA/mA"or
"10A" jack.
2. For current measurements up to 4000μA DC, set the
function switch to the μA position and insert the red test
lead banana plug into the μA/mA jack.
3. For current measurements up to 400mA DC, set the
function switch to the mA position and insert the red test
lead banana plug into the μA/mA jack..
4. For current measurements up to 10A DC, set the
function switch to the yellow 10A position and insert the
red test lead banana plug into the 10A jack.
5. Press the MODE button to indicate "DC" on the display.
16
Advertisement
