Advertisement
7.
Touch the black test probe tip to the neutral side of the
circuit.
Touch the red test probe tip to the "hot" side of the
circuit.
8.
Apply power to the circuit.
9.
Read the current in the display.
10. Press and hold the Hz% button to indicate "Hz".
11. Read the frequency in the display.
12. Momentarily press the Hz% button again to indicate
"%".
13. Read the % duty cycle in the display.
14. Press and hold the Hz% button to return to current
measurement.
Measuring Capacitance
1.
Set the function switch to the green CAP position.
2.
Insert the black test lead banana plug into the negative
COM jack and the red test lead banana plug into the
"V/Hz%/ /Cap/°C" jack. (If value is no zero in the
display .Press the REL button to zero)
3.
Touch the test probe tips across the part under test.
4.
Read the capacitance value in the display.
5.
The display will indicate the proper decimal point and
value.
18
Advertisement
