Advertisement
Measuring Temperature
1. Temperature Measurement for Outdoor:
2 Set the function switch to the green "0.1 °C" position or "1
°C" position .
3 Then the display will show the environment temperature
reading value °C directly.
4 Insert the black plug of temperature probe the COM jack
and red plug to the " V/Hz%/ /Cap/ °C " jack.
5 Touch the end of the temperature sensor to the area or
surface of the object to be measured. The display will
show the temperature reading value °C directly.
Measuring DC Voltage
1. Insert the black test lead banana to the COM jack and
red test lead banana to the "V/Hz%/ /Cap/ °C" jack.
2. Set the function switch to the green at DCV ranges to be
used and connect test leads connect test leads across
the source or load under measurement.
3. Set the function switch at DCmV ranges to be used
connect test leads connect test leads across the source
or load under measurement.
4. Read LCD display. The polarity of red connection will be
indicated when making a DC measurement.
5. Press the Hz% button to indicate "Hz".
6. Read the frequency in the display.
7. Press the Hz% button again to indicate "%".
8. Read the % of duty cycle in the display.
15
Advertisement
