Advertisement
11. Hold button
The HOLD function allows the meter to "freeze" a
measurement for later reference.Press the HOLD
button to "freeze" the reading on the indicator. The
"HOLD" message will be appear in the display.
12. Backlight button
Press the backlight button for LCD light , again Press
the backligh button to exit light mode.
13. MODE button
The button to select AC or DC measurement when in A,
mA , uA ,and ,
14. Range button
The button to select AC or DC measurement when in
Voltage,
15. REL button
The relative measurement feature allows you to make
measurements relative to a stored reference value. A
reference voltage, current, Capacitor, etc. can be
stored and measurements made in comparison to that
value. The displayed value is the difference between
the reference value and the measured value.
Perform the measurement as described in the
operating instructions.
Press the REL button to store the reading in the
display and the "REL" indicator will appear on the
display.
The display will now indicate the difference between
the stored value and the measured value.
Press the REL button to exit the relative mode.
16. NCV indicate lamp
, x))) ranges.
ranges.
11
Advertisement
