Download The Startup Page And View Switcher Status - Extron electronics DTP CrossPoint 108 4K User Manual

Download the Startup Page and View Switcher Status

Access the switcher using HTML pages as follows:
1.
2.
3.
4.
5.
6.
Start the Web browser program.
Click in the field of the browser and highlight any existing text.
Address
Enter the IP address of the switcher in the
NOTE: If the local system administrators have not changed the value, the
factory-specified default, 192.168.254.254, is the correct value for this field.
Press <Enter>. The switcher checks to see if it is password protected.
If the switcher is not password protected, it downloads the HTML page (see
on the next page).
If the switcher is password protected, the switcher downloads the
dialog box (see figure 71).
Required
Figure 71. Authentication Required Dialog Box
NOTE: By default, the
User Name
authentication requested.
Click in the field and enter in the appropriate name.
User Name
Click in the field and enter in the appropriate administrator or user password.
Password
Click the button.
OK
The switcher downloads the factory-installed HTML page (see
DTP CrossPoint 4K Series Matrix Switchers • HTML Operation
field of the browser.
Address
is either or , depending on the level of
admin user
figure
figure 72
Authentication
72).
142