HP 5120 SI Series Security Configuration Manual page 284

[SwitchB] public-key peer Switch001 import sshkey pubkey
# For user client001, set the service type as SFTP, authentication method as publickey, public key as
Switch001, and working folder as flash:/
[SwitchB] ssh user client001 service-type sftp authentication-type publickey assign
publickey Switch001 work-directory flash:/
3. Establish a connection between the SFTP client and the SFTP server
# Establish a connection to the remote SFTP server and enter SFTP client view.
<SwitchA> sftp 192.168.0.1 identity-key rsa
Input Username: client001
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1 ...
The Server is not authenticated. Continue? [Y/N]:y
Do you want to save the server public key? [Y/N]:n
sftp-client>
# Display files under the current directory of the server, delete the file named z, and check if the file has
been deleted successfully.
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
drwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
sftp-client> delete z
The following File will be deleted:
/z
Are you sure to delete it? [Y/N]:y
This operation might take a long time.Please wait...
File successfully Removed
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
drwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
# Add a directory named new1 and check if it has been created successfully.
sftp-client> mkdir new1
New directory created
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
drwxrwxrwx 1 noone
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
nogroup 283 Aug 24 07:39 pubkey
nogroup 0 Sep 01 06:22 new
nogroup 225 Sep 01 06:55 pub
nogroup 0 Sep 01 08:00 z
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
nogroup 283 Aug 24 07:39 pubkey
nogroup 0 Sep 01 06:22 new
nogroup 225 Sep 01 06:55 pub
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
nogroup 283 Aug 24 07:39 pubkey
nogroup 0 Sep 01 06:22 new
272