HP 5120 SI Series Security Configuration Manual page 162

Figure 56 Add an IP address group
# Add a portal device.
Select Portal Service Management > Device from the navigation tree to enter the portal device
configuration page. Then, click Add to enter the page for adding a portal device, as shown in
Enter the device name NAS.
•
Enter the IP address of the switch's interface connected to the user.
•
• Enter the key, which must be the same as that configured on the switch.
Set whether to enable IP address reallocation. This example uses direct portal authentication, and
•
therefore select No from the Reallocate IP list.
Select Yes for both Support Server Heartbeat and Support User Heartbeat.
•
Figure 57 Add a portal device
# Associate the portal device with the IP address group.
As shown in Figure 63, click the icon in the Port Group Information Management column of device NAS
to enter the port group configuration page.
150
Figure 62.