Replacing The Microswitch With A New One; Replacing The Tube With A New One - NAMCO TIME CRISIS 2 Operation Manual

8. MAINTENANCE

(5) Replacing the microswitch with a new one

q
Detach the gun cover(R) and gun slide (R). (See P-69.8-3-5 (2) "How to Open the Gun
Slide" and P-70.8-3-5 (3) "How to Open the Gun Cover.")
q
Attach the new microswitch in reverse order.

(6) Replacing the tube with a new one

q
Remove the two button bolts (M4 x lo), then detach the connector cover.
q
Remove the gun slides (L) and (R) and gun cover (12). (See P-70,8-3-5 (3) "How to Open
the Gun Cover.")
q
Detach the solenoid bracket and detach the
(See P-71,8-3-5 (4) "How to Replace the Solenoid with a New One.")
Disconnect the connectors of the sensor and
q
Remove the button bolt (M4
q
Attach the new tube in reverse order.
Connector
Button bolt (M4 x 10)
l
Before carrying out this task, always turn
circuit from damage.
l
Before carrying out this task. always turn off the power switch to pmtect
circuit from damage.
x
Fasten terminal
(microswitch)
(sensor)
off the power switch to protect the electtic
black hamess.
Connect the blue harness.
connectors and ground wire.
solenoid1
fasten terminals of the microswitch.
the
Connector (solenoid)
7 2
. .
the electric
Button bol t (M4 x 10)
Connector cover