I/O Tests For Switches (I/O Test) - NAMCO TIME CRISIS 2 Operation Manual

7. OPERATING THIS MACHINE
Conduct VO tests on the switches.
q
While on the MENU screen, select I/O TEST and press the enter switch. The I/O TEST screen
will then appear.
q
With the select switch, choose an option you wish
q
Press the enter switch to go back to the test screen for the blinking option.
q
Select EXlT and press the enter switch to go back to the MENU screen.
(a) Status of the DIP switches
This displays the status of the DIP switches on the game PC board. The switches of the
l
numbers in red are on. (They are all factory-configured to be off.)
. All of them are normally used in the off status.
(b) Communication check
(game PC board) may be defective. Contact your dealer.
. When this machine is to
it is fo be in the solo play mode. (See P-25,7-2-2 "Modes.")
12345678
DIP 4
ON 2
LINK
PCB CKECX
I/O
INITIALIZE
SOLENOID TEST
the communications status.
unidentified data is received
When
Table of communication check settings
run with one of the game PC boards for repair or other purposes.
be
3 4
[ON/OFF]
ENTER
execute. The selected option blinks.
CO
.